Precision Pressure Logger EBI 12-TP290
high precision pressure measurement down to 0.1 mbar
In the VH2O2 sterilizer, the generation of a fine vacuum is a prerequisite for the success of the sterilization process. For a routine check but also for measurement during validation, this data logger with its high accuracy is available.
The data logger must never be used in a steam sterilizer or otherwise exposed to an absolute pressure >2,000 mbar.
Benefits:
- high accuracy
- robust data logger
- fast response time
- Realtime data transmission
Applications:
- Sterilization mit VH2O2
Datasheet
Product number:
1340-6666
- Data memory
- 33,440 measurement values
- Sensor
- Pt 1000, piezoresistive pressure sensor
- Weight
- Aprox. 120 g
- Accuracy
- Pressure: 0.25 mbar (0.1 to 50 mbar) ±5 % of measured value (50 to 100mbar) 1 % FS (100 to 1050 mbar) Temperature: ±0.1 °C (0 °C to +85 °C)
- Protection class
- IP68
- Dimensions
- ø 48 mm x 35 mm - Needle length 40 mm
- Resolution
- Pressure: 0,1 mbar Temperature: 0,01°C
- Certificate
- Factory Calibration: 0 °C and +60 °C
- Measured variables
- Pressure, Temperature
- Intervall
- 250 ms...24 h.
- Battery
- Lithium cell, 3.6 V, user replaceable
- Measuring range
- Pressure: 0,1 mbar ... 1050 mbar.Temperature: 0°C ... +85°C
-
- 4-port Interface IF 200
- Software Winlog.validation
- USB connection
- Colored LEDs signaling programming, readout and incorrect development
- Includes antenna
Product number: 1340-6068 -
- 4-port Interface IF 200
- Software Winlog.pro
- USB connection
- Colored LEDs signaling programming,readout and incorrect development
- Includes antenna
Product number: 1340-6062 -
- 2-port Interface IF 100
- Software Winlog.med
- USB connection
- Colored LEDs signaling programming, readout and incorrect development
Product number: 1340-6064 -
- 1-port Interface IF 150
- Software Winlog.med
- USB connection Colored
- LEDs signaling programming, readout and incorrect development
Product number: 1340-6193 -
• USB-connector
• Colored LED signals programming,
readout and faulty execution
• Including Antenna AL 111
• Software Winlog.medProduct number: 1340-6095
-
For EBI 12 + EBI 16 Consisting of 3 batteries, 6 O-rings with grease.Product number: 1100-0118 -
Consisting of 3 batteries, 6 O-rings with grease and opening tool EBI 12Product number: 1100-0130 -
-
For transport of systainers Fixed seat of the systainers on the trolleyProduct number: 1248-0127 -
Inlay for EBI 12 and interface especially for validation setsProduct number: 1248-1100 -
- Combined
- Modular construction
- Loggers are safely stored
Product number: 1248-0128
-
ISO Calibration for pressure- temperature data logger, humidity- and conductivity data logger at 3 standard temperature points and the calibration of the additional measurand of the following product series: EBI 12, EBI 11, EBI 10, EBI 100.Product number: 1030-2223 -
Accredited calibration according to DAkkS guidelines for pressure- temperature data logger, humidity- and conductivity data logger at three temperature points of the following product series: EBI 12, EBI 11, EBI 10, EBI 100.Consisting of an accredited calibration according to DIN EN ISO / IEC 17025.Product number: 1030-3223 -
Accredited calibration according to DAkkS guidelines for pressure- temperature data logger, humidity- and conductivity data logger at four temperature points of the following product series: EBI 12, EBI 11, EBI 10, EBI 100.Consisting of an accedited calibration according to DIN EN ISO / IEC 17025.Product number: 1030-3224
-
Accredited calibration according to DAkkS guidelines for pressure- temperature data logger, humidity- and conductivity data logger at five temperature points.Calibration service for pressure- temperature data logger of the following product series:
EBI 12, EBI 11, EBI 10, EBI 100Consisting of an accedited calibration according to DIN EN ISO / IEC 17025.Product number: 1030-3225 -
Accredited calibration according to DAkkS guidelines for pressure- temperature data logger, humidity- and conductivity data logger at six temperature points of the following product series: EBI 12, EBI 11, EBI 10, EBI 100.Consisting of an accedited calibration according to DIN EN ISO / IEC 17025.Product number: 1030-3226
-
Accredited calibration according to DAkkS guidelines for pressure- temperature data logger, humidity- and conductivity data logger at seven temperature points of the following product series: EBI 12, EBI 11, EBI 10, EBI 100.Consisting of an accedited calibration according to DIN EN ISO / IEC 17025.Product number: 1030-3227
-
Accredited calibration according to DAkkS guidelines for pressure- temperature data logger, humidity- and conductivity data logger at eight temperature points.
For data logger of the following product series: EBI 12, EBI 11, EBI 10, EBI 100.Consisting of an accedited calibration according to DIN EN ISO / IEC 17025.Product number: 1030-3228
- 2014/53/EU Radio Equipment Directive - RED