EBI 310 TH Multi-Use PDF Data Logger

Product number: 1340-6336

relative humidity monitoring in storages and during transports

For transport and storage monitoring.
Applications: Logistics, Laboratory, Pharma – Vaccine –Drugs, Food and Storage control

  • Tamper proof
  • Easy use through automatic PDF report generation, direct USB readout and configuration
  • Minimize training costs and user errors through simple, easy to use design
  • Eliminate costly and time consuming IQ/OQ procedures through standard reporting process
  • Reduce IT costs with due to the standardized software

Download Winlog.basic here for free

Brochures download

Data memory
120,000 measurements
Sensor
Pt 1000
Accuracy
(intern) ± 0,2 °C (- 30 °C … + 30 °C), ± 0,5 °C for the remaining measuring range (extern) ± 0,5 °C (0 °C … + 60 °C), ± 0,8 °C for the remaining measuring range Probe ± 2% zwischen 10% rF … 90% rF (bei 25 °C) ± 4% for the remaining measuring range
Protection class
IP20
Dimensions
129 x 33 x 14 mm
Certificate
Factory calibration certificate
Measured variables
Temperature, humidity
Intervall
1 s … 24 h
Battery
Lithium button cell (CR 2450), 3V
Measuring range
-30 °C...+75 °C Probe 0% rF...100% rF
Storage temperature
-40 °C...+85 °C
  • ISO Calibration Service for the following cold chain humidity and temperature data logger: EBI 20-TH, EBI 25-TH, EBI 300-TH, EBI 310-TH Consisting of an ISO calibration at 2 standard temperature points and the calibration of the additional measurand. The calibration points are defined by us. (according to ISO 9001)
    Product number: 1030-2322
  • Accredited calibration according to DAkkS guidelines for cold chain data logger at two temperature points of the following product series: EBI 20, EBI 25, EBI 300, EBI 310.
    Consisting of an accredited calibration according to DIN EN ISO / IEC 17025 (DAkkS).
    Product number: 1030-3322
  • Accredited calibration according to DAkkS guidelines for cold chain data logger at 3 temperature points of the following product series: EBI 20, EBI 25, EBI 300, EBI 310.
    Consisting of an accredited calibration according to DIN EN ISO / IEC 17025 (DAkkS).
    Product number: 1030-3323
  • Accredited calibration according to DAkkS guidelines for cold chain data logger at 4 temperature points of the following product series: EBI 20, EBI 25, EBI 300, EBI 310
    Consisting of an accredited calibration according to DIN EN ISO / IEC 17025 (DAkkS).
    Product number: 1030-3324
  • Accredited calibration according to DAkkS guidelines for cold chain data logger at 5 temperature points of the following product series: EBI 20, EBI 25, EBI 300, EBI 310.
    Consisting of an accredited calibration according to DIN EN ISO / IEC 17025 (DAkkS).
    Product number: 1030-3325
  • The PTFE-filter AH 100 provides little protection from mechanical strain but seals the probe from dust – protection class IP 60. In dusty environments, unprotected humidity probes, or probes protected by sintered fi lters, can quickly be covered by dust. This massively affects the humidity measurement, or prohibits it entirely. It won´t happen with the PTFE filter.
    Product number: 1340-5627
  • Relative humidity monitoring in storages and during transport
    Product number: 1341-6337
  • The stainless steel sintered filter AH 300 also increases the protection class to IP 40. The stainless steel massively increases the mechanical protection, e.g. from crushing the filter. Nothing will happen to your probe! In addition, the stainless steel is highly resistant to corrosion even in high temperature applications.
    Product number: 1340-5625
  • High strength polycarbonate
    Product number: 1340-6341
  • Wall Mount Stainless steel
    Product number: 1340-6344
  • Battery Lithium for EBI 20/ EBI 300/ 310

    Product number: 1100-0105
    • Supports: EBI 12, EBI 10, EBI 11, EBI 20, EBI 40, EBI 100, EBI 300, EBI 310, EBI 330
    • The professional software for programming and reading ebro data loggers
    Contains all properties of Winlog.basic
    • Enables real-time monitoring with radio wave data loggers
    • Formula editor for calculating the F0 value, the absolute humidity, the PE value, etc.
    • Display of the time axis either absolute or relative
    • Customised definition of individual areas possible (with custom statistics and calculations)
    • Includes calibration tool for the data logger Integration of images and diagrams into reports possible
    • FDA 21 CFR Part 11 functionality also possible
    • Optional IQ-/OQ documentation also available
    • Current version: 2.81

    ebro® offers exactly the right solution and the evaluation software you need for your application.

    Product number: 1340-2450
  • The new free software for programming and evaluation of data loggers. 

    • Supports: EBI 20, EBI 300, EBI 310, EBI 330
    • Basic software for programming and reading ebro Data loggers
    • User friendly: self-explanatory and easy to operate
    • Report generation, Graphic and numerical display of measurement data Searching and enlarging of measurement data
    • Data export into Microsoft® Excel and into PDF
    • FDA 21 CFR Part 11 functionality also possible
    • Current version: 2.81

    ebro® offers exactly the right solution and the evaluation software you need for your application.

    Download Winlog. basic here for free

    Product number: 1340-2375