Validation logger with fast response time EBI 11-T240

Validation logger with fast response time for use where space is limited

The data logger is used wherever space is limited and the temperature curve is to be recorded by a fast response time. Due to it's low height, the logger is often used for process validation with cassette autoclaves and small sterilizers.

Benefits:

  • little need of space
  • bendable metal probe
  • wireless measurement
  • fast response time

Applications:
  • Temperature measurement in cassette autoclaves
  • Validation logger for temperature measurement in the steam sterilizer,
  • WD and endoscope washer
  • F0 Value calculation

Datasheet

Product number: 1340-6291
Data memory
15.000 measured values
Weight
approx. 45 g
Accuracy
± 0.1°C
Protection class
IP68
Dimensions
Ø 16.5 mm x 24 mm - Needle length 250 mm
Resolution
0.01°C
Certificate
Factory Calibration: 0 °C, +60 °C and +134 °C
Measured variables
temperature
Intervall
1s...24h
Battery
Battery 2 x 3 V
Measuring range
-30 °...+150 °C
Storage temperature
-20 °C...+70 °C
  • AL 285 Logger Check In combination with the software Winlog.validation version >= 3.62 the AL 285 offers you a simple, on site functional check of the measuring channels.
    Product number:: 1248-0285
  • The test adapter offers a simple solution in connection with cleaning indicator (test soil) to perform a routine test in relation to cleaning performance as well as performance qualification during validation processes according to national standards. In addition to AL 126 we recommend also to use a combination of pressure and temperature logger.
    The set contains: 
    • Test adapter 
    • Luer-Lock connection to connect a
      pressure logger 
    • 2 x Tube adapter 4 mm 
    • 1 x clamp connection 1.5 mm 
    • 2 x O-rings for fitting test soil

    Product number:: 1248-0126
    • 4-port Interface IF 300
    • Software Winlog.validation
    • USB connection
    • Colored LED signalling programming, readout and incorrect development
    Product number:: 1340-6069
    • 2-port Interface IF 100
    • Software Winlog.med
    • USB connection
    • Colored LEDs signaling programming, readout and incorrect development

    Product number:: 1340-6064
    • 4-port Interface IF 300
    • Software Winlog.pro
    • USB connection
    • Colored LED signalling programming, readout and incorrect development
    Product number:: 1340-6063
    • 2-port Interface IF 100 Software
    • Winlog.pro
    • USB connection
    • Colored LEDs signaling programming, readout and incorrect development

    Product number:: 1340-6061
  • Battery Exchange Set for EBI 11 consisting of: 6 batteries, 3 gaskets with lubricant, screwdriver
    Product number:: 1100-0120
  • Suitable for 10 battery exchanges; contains 20 batteries, 10 O-rings with grease and changing tools.
    Product number:: 1100-0125
  • ISO calibration 1030-2203 at three standard points for process temperature data loggers
    Product number:: 1030-2203
  • Accredited calibration according to DAkkS guidelines for temperature- validation- and process logger at three points. Calibration service for data logger of the following product series:
    EBI 12, EBI 11, EBI 10, EBI 100.
    Consisting of an accredited calibration according to DIN EN ISO / IEC 17025.
    Product number:: 1030-3203
  • Accredited calibration according to DAkkS guidelines for temperature- validation- and process logger at four points of the following product series: EBI 12, EBI 11, EBI 10, EBI 100.
    Consisting of an accredited calibration according to DIN EN ISO / IEC 17025.
    Product number:: 1030-3204
  • Accredited calibration according to DAkkS guidelines for temperature- validation- and process logger at five points of the following product series: EBI 12, EBI 11, EBI 10, EBI 100.
    Consisting of an accredited calibration according to DIN EN ISO / IEC 17025.
    Product number:: 1030-3205
  • Accredited calibration according to DAkkS guidelines for temperature- validation- and process logger at six points of the following product series: EBI 12, EBI 11, EBI 10, EBI 100.
    Consisting of an accredited calibration according to DIN EN ISO / IEC 17025.
    Product number:: 1030-3206
  • ISO 17665 Sterilization of health care products — Moist heat
  • ISO 15883 Washer Disinfectors
  • (EC) 1935/2004 Materials and articles which come into contact with foodstuffs
  • 2014/30/EU The EMC Directive 2014/30/EU regulates the electromagnetic compatibility of equipment