SL 3111 Validation-Set for validation of large steam sterilizers
for large steam sterilizers
The set contains:
- 5 x EBI 12-T441 Temperature data loggers
- 1 x EBI 12-TP226 Temperature/ pressure data logger with AL 101 silicone protection box
- EBI IF 200, 4-port Interface with USB connection and antenna
- Software Winlog.validation
- Carrying case „SYSTAINER“
-
This data logger is often used for thermal measurement during validation. Its two 500 mm long bendable metal probes provide maximum flexibility in temperature probe placement.
Benefits:- large measuring range
- bendable metal probe
- high accuracy
- Realtime data transmission
- wireless measurement
Applications:- Validation logger for temperature measurement in the steam sterilizer, WD and endoscope washer
Datasheet
Product number: 1340-6629 -
Validation logger for thermal testing of processes with steam sterilizers. The logger is characterized by its bendable metal probes. The very thin temperature sensors with a diameter of 1.5 mm at the sensor tip enable a very fast response time. The data logger is often used for temperature measurement in the sterilizer drain with simultaneous pressure measurement.
Benefits:- bendable metal probe
- high accuracy
- Realtime data transmission
- fast response time
- sterilizable data logger
Applications:- Validation logger for Measurement in the steam sterilizer, WD and endoscope washer
- Measurement in the drain of the steam sterilizer.
Datasheet
Product number: 1340-6657 -
For transport of systainers Fixed seat of the systainers on the trolleyProduct number: 1248-0127
-
Save time and effort for the regularly required process validation with the help of the powerful reporting and evaluation software Winlog.validation.
The automatic recognition of the individual process steps makes your work easier and meets the high demands of validation and qualification in pharmacy and medicine.
The TÜV-certified evaluation software Winlog.validation enables you to carry out automatic and manual evaluations of the processes. You can adapt it to your needs at any time with individual process parameters and test criteria.
- Supports:EBI 10, EBI 11, EBI 12, EBI 16, EBI 20, EBI 300, EBI 310, EBI 40, EBI 100
In addition, the following hand-held measuring devices can be integrated: CT830, PHT 830
- For routine checks and validation
- High-performance report and evaluation software for the stringent requirements of validation and qualification in the pharmaceutical and medical sectors
- User-friendly
- Highly accurate measurements
- Automatic report generation
- Automatic user-defined calculations
- Automatic recognition of process cycles
- Creation of user-defined templates for specific devices and thermal processes
- Three-dimensional display of sensor placement
- FDA 21 CFR Part 11 functionality also possible
- Incl. IQ- / OQ-Documentation for software Qualification
- Automatic completion of validation processes
- Current version: 4.2
ebro® offers exactly the right solution and the evaluation software you need for your application.Currently, the products of the device series EBI 1, EBI 2, EBI 15, EBI 30 are still supported by the software. However, the software is no longer tested with the units.
We will be happy to make you an offer – please call us:
+49 841 95478-22, +49 841 95478-23, +49 841 95478-21
Product number: 1340-2470 - Supports:EBI 10, EBI 11, EBI 12, EBI 16, EBI 20, EBI 300, EBI 310, EBI 40, EBI 100
-
- Supports: EBI 10, EBI 12, EBI 11, EBI 16, EBI 20, EBI 40, EBI 100, EBI 300, EBI 310
- For routine checks
- User friendly High-precision measurements
- Automatic report generation
- Automatic user-defined calculations
- Automatic recognition of process cycles
- Creation of user-defined templates for specific devices and thermal processes
- Three-dimensional display of sensor placement
- FDA 21 CFR Part 11 functionality also possible
- Current version: 3.71
ebro® offers exactly the right solution and the evaluation software you need for your application.
Product number: 1340-2460 -
- Supports: EBI 12, EBI 10, EBI 11, EBI 20, EBI 40, EBI 100, EBI 300, EBI 310, EBI 330
- The professional software for programming and reading ebro data loggers Contains all properties of Winlog.basic
- Enables real-time monitoring with radio wave data loggers
- Formula editor for calculating the F0 value, the absolute humidity, the PE value, etc.
- Display of the time axis either absolute or relative
- Customised definition of individual areas possible (with custom statistics and calculations)
- Includes calibration tool for the data logger Integration of images and diagrams into reports possible
- FDA 21 CFR Part 11 functionality also possible
- Optional IQ-/OQ documentation also available
- Current version now also supports Windows 10 (x64 or x86), Windows 11 (x64 or x86)
ebro® offers exactly the right solution and the evaluation software you need for your application.
Product number: 1340-2450
NEW: Information package "Professional data loggers"
Please fill out the form below and the download will start instantly.