EBI 11-T235 Temperature validation logger

Product number: 1340-6270

Validation logger for temperature measurement in the doctors surgeries

The EBI 11-T235 validation logger was specially developed for the validation of reprocessing of medical devices in the tertiary sector. It is adapted to the validation concept for the Sirona DAC Universal and Melag Careclave units.

In addition to being used in doctors surgeries, the logger can also be used to measure the temperature in the endoscope dummy. The needle length is precisely matched to the AL 126 adapter.

Benefits:

  •  simple and repeatable placement
  •  wireless measurement
  •  small size
  •  high accuracy

  Applications:
  •  validation at doctors surgeries
  •  process validation with DAC Universal
  •  process validation with Careclave
  •  process validation with endoscope-dummy,
     Spypach Process validation
  •  Process validation

Datasheet

NEW: Information package "Professional data loggers"

You still need a more comprehensive overview of the possibilities and requirements of the data logger, references to the service, certificates or the suitable software? Then read the comprehensive information package for the food sector or the medical/pharmaceutical sector here.
Go to information package
Data memory
15.000 measurement value
Weight
ca. 45 g
Accuracy
±0,1°C
Protection class
IP68
Dimensions
ø 16,5 x 24 mm (without probe) - Needle length 31 mm
Resolution
0,01°C
Certificate
Factory Calibration: 0 °C, +60 °C and +134 °C
Measured variables
Temperature
Intervall
1s...24h
Battery
Battery 2 x 3 V
Measuring range
-30 °C...+150 °C
Storage temperature
-20 °C...+70 °C
  • The test adapter offers a simple solution in connection with cleaning indicator (test soil) to perform a routine test in relation to cleaning performance as well as performance qualification during validation processes according to national standards. In addition to AL 126 we recommend also to use a combination of pressure and temperature logger.
    The set contains: 
    • Test adapter 
    • Luer-Lock connection to connect a
      pressure logger 
    • 2 x Tube adapter 4 mm 
    • 1 x clamp connection 1.5 mm 
    • 2 x O-rings for fitting test soil

    Product number: 1248-0126
  • With the Adapter set is an independent process qualification of a DAC Universal MK III and MK IV in
    combination with ebro EBI 11 data loggers possible. No modification on the customers lid necessary.
    The set contains:
    • 1 x Logger mount
    • 1 x PCD test body incl. adapter for ISO, Sirona and KaVo
    • Carrying case „SYSTAINER“
    Product number: 1248-3305
  • DAC Cleaning adapter matching to ISO connector
    Product number: 1248-3306
  • DAC Cleaning adapter matching to Sirona connector
    Product number: 1248-3307
  • DAC Cleaning adapter matching to KaVo connector
    Product number: 1248-3308
  • AL 3312 Careclave 618 adapter
    Product number: 1248-3312
  • 4-port Interface IF 300
    Software Winlog.validation
    USB connection
    Colored LED signalling programming, readout and incorrect development
    Product number: 1340-6069
  • 2-port Interface IF 100
    Software Winlog.med
    USB connection
    Colored LEDs signaling programming, readout and incorrect development

    Product number: 1340-6064
  • Battery Exchange Set for EBI 11 consisting of: 6 batteries, 3 gaskets with lubricant, screwdriver
    Product number: 1100-0120
  • Suitable for 10 battery changes; consisting of 20 batteries, 10 O-rings with grease and changing tool.
    Product number: 1100-0125
  • ISO calibration 1030-2203 at three standard points for process temperature data loggers
    Product number: 1030-2203
  • Accredited calibration according to DAkkS guidelines for temperature- validation- and process logger at three points. Calibration service for data logger of the following product series:
    EBI 12, EBI 11, EBI 10, EBI 100.
    Consisting of an accredited calibration according to DIN EN ISO / IEC 17025.
    Product number: 1030-3203
  • Accredited calibration according to DAkkS guidelines for temperature- validation- and process logger at four points of the following product series: EBI 12, EBI 11, EBI 10, EBI 100.
    Consisting of an accredited calibration according to DIN EN ISO / IEC 17025.
    Product number: 1030-3204
  • Accredited calibration according to DAkkS guidelines for temperature- validation- and process logger at five points of the following product series: EBI 12, EBI 11, EBI 10, EBI 100.
    Consisting of an accredited calibration according to DIN EN ISO / IEC 17025.
    Product number: 1030-3205
  • Accredited calibration according to DAkkS guidelines for temperature- validation- and process logger at six points of the following product series: EBI 12, EBI 11, EBI 10, EBI 100.
    Consisting of an accredited calibration according to DIN EN ISO / IEC 17025.
    Product number: 1030-3206
  • ISO 17665 Sterilization of health care products — Moist heat
  • ISO 15883 Washer Disinfectors
  •  (EC) 1935/2004 Materials and articles which come into contact with foodstuffs
  • 2014/30/EU The EMC Directive 2014/30/EU regulates the electromagnetic compatibility of
   equipment


NEW: Information package "Professional data loggers"

Please fill out the form below and the download will start instantly.
Information package