Logo ebro

EBI 11-T240 Validation logger with fast response time

EBI 11-T240
Request a Quote
Product number: 1340-6291

Validation logger with fast response time for use where space is limited

The data logger is used wherever space is limited and the temperature curve is to be recorded by a fast response time. Due to it's low height, the logger is often used for process validation with cassette autoclaves and small sterilizers.

Benefits:

  • little need of space
  • bendable metal probe
  • wireless measurement
  • fast response time

Applications:
  • Temperature measurement in cassette autoclaves
  • Validation logger for temperature measurement in the steam sterilizer,
  • WD and endoscope washer
  • F0 Value calculation

Datasheet

Manual

NEW: Information package "Professional data loggers"

You still need a more comprehensive overview of the possibilities and requirements of the data logger, references to the service, certificates or the suitable software? Then read the comprehensive information package for the food sector or the medical/pharmaceutical sector here.
Go to information package
Data memory
15.000 measured values
Weight
approx. 45 g
Accuracy
± 0.1°C
Protection class
IP68
Dimensions
Ø 16.5 mm x 24 mm - Needle length 250 mm
Resolution
0.01°C
Certificate
Factory Calibration: 0 °C, +60 °C and +134 °C
Measured variables
temperature
Intervall
1s...24h
Battery
Battery 2 x 3 V
Measuring range
-30 °...+150 °C
Storage temperature
-20 °C...+70 °C
  • AL 285
    AL 285
    AL 285 Logger Check In combination with the software Winlog.validation version >= 3.62 the AL 285 offers you a simple, on site functional check of the measuring channels.
    Product number: 1248-0285
  • AL 126
    AL 126

    The test adapter offers a simple solution in connection with cleaning indicator (test soil) to perform a routine test in relation to cleaning performance as well as performance qualification during validation processes according to national standards. In addition to AL 126 we recommend also to use a combination of pressure and temperature logger.
    The set contains: 
    • Test adapter 
    • Luer-Lock connection to connect a
      pressure logger 
    • 2 x Tube adapter 4 mm 
    • 1 x clamp connection 1.5 mm 
    • 2 x O-rings for fitting test soil

    Product number: 1248-0126
  • Interface SI 3300
    Interface SI 3300
    4-port Interface IF 300
    Software Winlog.validation
    USB connection
    Colored LED signalling programming, readout and incorrect development
    Product number: 1340-6069
  • Interface SI 2100
    Interface SI 2100

    2-port Interface IF 100
    Software Winlog.med
    USB connection
    Colored LEDs signaling programming, readout and incorrect development

    Product number: 1340-6064
  • Interface Set SI 1300
    Interface Set SI 1300
    4-port Interface IF 300
    Software Winlog.pro
    USB connection
    Colored LED signalling programming, readout and incorrect development
    Product number: 1340-6063
  • Interface SI 1100
    Interface SI 1100

    2-port Interface IF 100 Software
    Winlog.pro
    USB connection
    Colored LEDs signaling programming, readout and incorrect development

    Product number: 1340-6061
  • AL 113
    AL 113
    Battery Exchange Set for EBI 11 consisting of: 6 batteries, 3 gaskets with lubricant, screwdriver
    Product number: 1100-0120
  • AL 113L Battery replacement set for EBI 11
    AL 113L Battery replacement set for EBI 11
    Suitable for 10 battery changes; consisting of 20 batteries, 10 O-rings with grease and changing tool.
    Product number: 1100-0125
  • Calibration 1030-2203
    Calibration 1030-2203
    ISO calibration 1030-2203 at three standard points for process temperature data loggers
    Product number: 1030-2203
  • Calibration 1030-3203
    Calibration 1030-3203
    Accredited calibration according to DAkkS guidelines for temperature- validation- and process logger at three points. Calibration service for data logger of the following product series:
    EBI 12, EBI 11, EBI 10, EBI 100.
    Consisting of an accredited calibration according to DIN EN ISO / IEC 17025.
    Product number: 1030-3203
  • Calibration 1030-3204
    Calibration 1030-3204
    Accredited calibration according to DAkkS guidelines for temperature- validation- and process logger at four points of the following product series: EBI 12, EBI 11, EBI 10, EBI 100.
    Consisting of an accredited calibration according to DIN EN ISO / IEC 17025.
    Product number: 1030-3204
  • Calibration 1030-3205
    Calibration 1030-3205
    Accredited calibration according to DAkkS guidelines for temperature- validation- and process logger at five points of the following product series: EBI 12, EBI 11, EBI 10, EBI 100.
    Consisting of an accredited calibration according to DIN EN ISO / IEC 17025.
    Product number: 1030-3205
  • Calibration 1030-3206
    Calibration 1030-3206
    Accredited calibration according to DAkkS guidelines for temperature- validation- and process logger at six points of the following product series: EBI 12, EBI 11, EBI 10, EBI 100.
    Consisting of an accredited calibration according to DIN EN ISO / IEC 17025.
    Product number: 1030-3206
  • ISO 17665 Sterilization of health care products — Moist heat
  • ISO 15883 Washer Disinfectors
  • (EC) 1935/2004 Materials and articles which come into contact with foodstuffs
  • 2014/30/EU The EMC Directive 2014/30/EU regulates the electromagnetic compatibility of equipment 

NEW: Information package "Professional data loggers"

Please fill out the form below and the download will start instantly.
Information package