EBI 12-T220 Validation logger to measure in steam sterilizer
Product number:
1340-6604
Bendable probe for placement in steam sterilizer drain
This data logger is often used to measure the temperature in the steam sterilizer outlet during thermal testing during validation. It is characterized by its small size and fast response time. The bendable temperature sensor can be placed very well.
Benefits:
- large measuring range
- wireless measurement
- Realtime data transmission
- fast response time
- bendable metal probe
Applications:
- Validation logger for temperature measurement in the steam sterilizer, WD and endoscope washer
- Measurement of the temperature in the drain of the steam sterilizer.
- A0 Value calculation
- F0 Value calculation
- Data memory
- 100,320 measurement values
- Sensor
- Pt 1.000, Class A
- Weight
- approx. 110 g
- Accuracy
- ± 1,5 °C (-200 °C … -85 °C) ± 0,5°C (-85 °C … -40 °C) ± 0,2°C (-40 °C … 0 °C) ± 0,1 °C (0 °C ... +120 °C) ± 0,05 °C (+120 °C … +140 °C) ± 0,1 °C (+140 °C … +150 °C)
- Protection class
- IP68
- Dimensions
- (Ø x H) 48 mm x 24 mm - Needle length 250 mm
- Resolution
- 0,01 °C
- Certificate
- Factory Calibration: -20 °C, 0 °C, +60 °C and +134 °C
- Measured variables
- Temperature
- Intervall
- 250 msec ... 24 h
- Measuring range
- -200 °C … +200 °C
- Storage temperature
- -20 °C ... +70 °C
-
- Developed for real time monitoring
- AL 112 is a cable with 3 m length
- Antenna placement in the field of the door seal of a sterilizer or washer disinfector
- Antenna steam-tight
- It is possible by a sealing to introduce it in the chamber
Product number: 1340-6007 -
for opening the data logger, e.g. for battery change. The set consists of 2 parts
Product number: 1100-0131 -
AL 285 Logger Check In combination with the software Winlog.validation version >= 3.62 the AL 285 offers you a simple, on site functional check of the measuring channels.Product number: 1248-0285
-
Eyelet ring incl. sealing rings for EBI 12 to mount the data loggerProduct number: 1248-0122
-
4-port Interface IF 200
Software Winlog.validation
USB connection
Colored LEDs signaling programming, readout and incorrect development
Includes antenna
Product number: 1340-6068 -
4-port Interface IF 200
Software Winlog.pro
USB connection
Colored LEDs signaling programming,readout and incorrect development
Includes antenna
Product number: 1340-6062 -
USB-connector
Colored LED signals programming,
readout and faulty execution
Including Antenna AL 111
Software Winlog.medProduct number: 1340-6095
-
Consisting of 3 batteries, 6 O-rings with grease and opening tool EBI 12Product number: 1100-0130
-
For EBI 12 + EBI 16 Consisting of 3 batteries, 6 O-rings with grease.Product number: 1100-0118
-
for opening the data logger, e.g. for battery change. The set consists of 2 parts
Product number: 1100-0131
-
For transport of systainers Fixed seat of the systainers on the trolleyProduct number: 1248-0127
-
Consisting of 3 batteries, 6 O-rings with grease and opening tool EBI 12Product number: 1100-0130
-
Especially for validation sets Insert for EBI 12 and InterfaceProduct number: 1248-1100
-
ISO Calibration for temperature- validation- and process logger at 4 standard points of the following product series: EBI 12, EBI 11, EBI 10, EBI 100.Product number: 1030-2204
-
Accredited calibration according to DAkkS guidelines for temperature- validation- and process logger at three points. Calibration service for data logger of the following product series:EBI 12, EBI 11, EBI 10, EBI 100.Consisting of an accredited calibration according to DIN EN ISO / IEC 17025.Product number: 1030-3203
-
Accredited calibration according to DAkkS guidelines for temperature- validation- and process logger at four points of the following product series: EBI 12, EBI 11, EBI 10, EBI 100.Consisting of an accredited calibration according to DIN EN ISO / IEC 17025.Product number: 1030-3204
-
Accredited calibration according to DAkkS guidelines for temperature- validation- and process logger at five points of the following product series: EBI 12, EBI 11, EBI 10, EBI 100.Consisting of an accredited calibration according to DIN EN ISO / IEC 17025.Product number: 1030-3205
-
Accredited calibration according to DAkkS guidelines for temperature- validation- and process logger at six points of the following product series: EBI 12, EBI 11, EBI 10, EBI 100.Consisting of an accredited calibration according to DIN EN ISO / IEC 17025.Product number: 1030-3206
• ISO 17665 Sterilization of health care products — Moist heat
• ISO 15883 Washer Disinfectors
• 2014/53/EU Radio Equipment Directive - RED
• (EC) 1935/2004 Materials and articles which come into contact with foodstuffs
• ISO 15883 Washer Disinfectors
• 2014/53/EU Radio Equipment Directive - RED
• (EC) 1935/2004 Materials and articles which come into contact with foodstuffs
NEW: Information package "Professional data loggers"
Please fill out the form below and the download will start instantly.