EBI 12-T441 Validation logger to measure in steam sterilizer
Product number:
1340-6629
bendable sensor for placement in cavities
This data logger is often used for thermal measurement during validation. Its two 500 mm long bendable metal probes provide maximum flexibility in temperature probe placement.
Benefits:
- large measuring range
- bendable metal probe
- high accuracy
- Realtime data transmission
- wireless measurement
Applications:
- Validation logger for temperature measurement in the steam sterilizer, WD and endoscope washer
Datasheet
- Data memory
- 2 x 50,160 measurement values
- Sensor
- Pt 1,000, class A
- Weight
- approx. 110 g
- Accuracy
- ± 1,5 °C (-200 °C … -85 °C) ± 0,5 °C (-85 °C … -40 °C) ± 0,2 °C (-40 °C … 0 °C) ± 0,1 °C (0 °C ... +120 °C) ± 0,05 °C (+120 °C … +140 °C) ± 0,1 °C (+140 °C … +150 °C) ± 0,5 °C (+150 °C… +200 °C)
- Protection class
- IP68
- Dimensions
- (Ø x H) 48 mm x 24 mm - Needle length 500 mm
- Resolution
- 0,01 °C
- Certificate
- Factory Calibration: -20 °C, 0 °C, +60 °C and +134 °C
- Measured variables
- Temperature
- Intervall
- 250 msec ... 24 h
- Measuring range
- -200 °C … +200 °C
- Storage temperature
- -20 °C ... +70 °C
-
- Developed for real time monitoring
- AL 112 is a cable with 3 m length
- Antenna placement in the field of the door seal of a sterilizer or washer disinfector
- Antenna steam-tight
- It is possible by a sealing to introduce it in the chamber
Product number: 1340-6007 -
Eyelet ring incl. sealing rings for EBI 12 to mount the data loggerProduct number: 1248-0122
-
AL 285 Logger Check In combination with the software Winlog.validation version >= 3.62 the AL 285 offers you a simple, on site functional check of the measuring channels.Product number: 1248-0285
-
for opening the data logger, e.g. for battery change. The set consists of 2 parts
Product number: 1100-0131
-
4-port Interface IF 200
Software Winlog.validation
USB connection
Colored LEDs signaling programming, readout and incorrect development
Includes antenna
Product number: 1340-6068 -
2-port Interface IF 100 Software
Winlog.pro
USB connection
Colored LEDs signaling programming, readout and incorrect development
Product number: 1340-6061 -
4-port Interface IF 200
Software Winlog.pro
USB connection
Colored LEDs signaling programming,readout and incorrect development
Includes antenna
Product number: 1340-6062 -
USB-connector
Colored LED signals programming,
readout and faulty execution
Including Antenna AL 111
Software Winlog.medProduct number: 1340-6095 -
1-port Interface IF 150
Software Winlog.med
USB connection Colored
LEDs signaling programming, readout and incorrect development
Product number: 1340-6193
-
for opening the data logger, e.g. for battery change. The set consists of 2 parts
Product number: 1100-0131 -
For EBI 12 + EBI 16 Consisting of 3 batteries, 6 O-rings with grease.Product number: 1100-0118
-
Consisting of 3 batteries, 6 O-rings with grease and opening tool EBI 12Product number: 1100-0130
-
For transport of systainers Fixed seat of the systainers on the trolleyProduct number: 1248-0127
-
- Combined
- Modular construction
- Loggers are safely stored
Product number: 1248-0128 -
Especially for validation sets Insert for EBI 12 and InterfaceProduct number: 1248-1100
-
ISO Calibration for temperature- validation- and process logger at 4 standard points of the following product series: EBI 12, EBI 11, EBI 10, EBI 100.Product number: 1030-2204
-
Accredited calibration according to DAkkS guidelines for temperature- validation- and process logger at three points. Calibration service for data logger of the following product series:EBI 12, EBI 11, EBI 10, EBI 100.Consisting of an accredited calibration according to DIN EN ISO / IEC 17025.Product number: 1030-3203
-
Accredited calibration according to DAkkS guidelines for temperature- validation- and process logger at four points of the following product series: EBI 12, EBI 11, EBI 10, EBI 100.Consisting of an accredited calibration according to DIN EN ISO / IEC 17025.Product number: 1030-3204
-
Accredited calibration according to DAkkS guidelines for temperature- validation- and process logger at five points of the following product series: EBI 12, EBI 11, EBI 10, EBI 100.Consisting of an accredited calibration according to DIN EN ISO / IEC 17025.Product number: 1030-3205
-
Accredited calibration according to DAkkS guidelines for temperature- validation- and process logger at six points of the following product series: EBI 12, EBI 11, EBI 10, EBI 100.Consisting of an accredited calibration according to DIN EN ISO / IEC 17025.Product number: 1030-3206
- ISO 17665 Sterilization of health care products — Moist heat
- ISO 15883 Washer Disinfectors
- 2014/53/EU Radio Equipment Directive - RED
- (EC) 1935/2004 Materials and articles which come into contact with foodstuffs
NEW: Information package "Professional data loggers"
Please fill out the form below and the download will start instantly.