EBI 12-TP226 Validation logger for steam sterilizers
Product number:
1340-6657
Bendable probe for placement in steam sterilizer drain
Validation logger for thermal testing of processes with steam sterilizers. The logger is characterized by its bendable metal probes.
The very thin temperature sensors with a diameter of 1.5 mm at the sensor tip enable a very fast response time.
The data logger is often used for temperature measurement in the sterilizer drain with simultaneous pressure measurement.
Benefits:
- bendable metal probe
- high accuracy
- Realtime data transmission
- fast response time
- sterilizable data logger
Applications:
- Validation logger for Measurement in the steam sterilizer, WD and endoscope washer
- Measurement in the drain of the steam sterilizer.
Datasheet
- Data memory
- 2 x 33,440 measurement values
- Weight
- aprox. 120 g
- Accuracy
- ±0,1 °C (0 °C ... +120 °C) ±0,05 °C (+120 °C ... +140 °C) ±0,1 °C (+140 °C ... +150 °C)
±15 mbar (1 mbar ... 50 mbar), ±10 mbar (50 mbar … 150 mbar), ±10 mbar (2.050 mbar … 2.250 mbar),
±10 mbar (3.000 mbar … 3.250 mbar), ± 15 mbar (3.250 mbar ... 3.500 mbar),
± 0,5 % FS (3.500 mbar ... 4.000 mbar) - Protection class
- IP68
- Dimensions
- ø 48 mm x 32 mm - Needle length 250 mm
- Resolution
- 0,01 °C 1 mbar
- Certificate
- Factory Calibration: 0 °C, +60 °C and +134 °C 100 mbar and 3,100 mbar at +25 °C and 3,100 mbar at +134 °C
- Measured variables
- Temperature, Pressure
- Intervall
- 250 ms ... 24 h
- Battery
- 3.6 V lithium battery exchangeable
- Measuring range
- Temperature: 0 °C … +150 °C Pressure: 1 … 4.000 mbar
- Storage temperature
- -20 °C ... +70 °C
-
for opening the data logger, e.g. for battery change. The set consists of 2 parts
Product number: 1100-0131 -
- Developed for real time monitoring
- AL 112 is a cable with 3 m length
- Antenna placement in the field of the door seal of a sterilizer or washer disinfector
- Antenna steam-tight
- It is possible by a sealing to introduce it in the chamber
Product number: 1340-6007 -
Eyelet ring incl. sealing rings for EBI 12 to mount the data loggerProduct number: 1248-0122 -
AL 285 Logger Check In combination with the software Winlog.validation version >= 3.62 the AL 285 offers you a simple, on site functional check of the measuring channels.Product number: 1248-0285
-
4-port Interface IF 200
Software Winlog.pro
USB connection
Colored LEDs signaling programming,readout and incorrect development
Includes antenna
Product number: 1340-6062 -
4-port Interface IF 200
Software Winlog.validation
USB connection
Colored LEDs signaling programming, readout and incorrect development
Includes antenna
Product number: 1340-6068 -
2-port Interface IF 100
Software Winlog.med
USB connection
Colored LEDs signaling programming, readout and incorrect development
Product number: 1340-6064 -
USB-connector
Colored LED signals programming,
readout and faulty execution
Including Antenna AL 111
Software Winlog.medProduct number: 1340-6095 -
1-port Interface IF 150
Software Winlog.med
USB connection Colored
LEDs signaling programming, readout and incorrect development
Product number: 1340-6193
-
for opening the data logger, e.g. for battery change. The set consists of 2 parts
Product number: 1100-0131 -
Consisting of 3 batteries, 6 O-rings with grease and opening tool EBI 12Product number: 1100-0130 -
For EBI 12 + EBI 16 Consisting of 3 batteries, 6 O-rings with grease.Product number: 1100-0118
-
For transport of systainers Fixed seat of the systainers on the trolleyProduct number: 1248-0127 -
Especially for validation sets Insert for EBI 12 and InterfaceProduct number: 1248-1100 -
- Combined
- Modular construction
- Loggers are safely stored
Product number: 1248-0128
-
ISO Calibration for pressure- temperature data logger, humidity- and conductivity data logger at 3 standard temperature points and the calibration of the additional measurand of the following product series: EBI 12, EBI 11, EBI 10, EBI 100.Product number: 1030-2223 -
Accredited calibration according to DAkkS guidelines for pressure- temperature data logger, humidity- and conductivity data logger at three temperature points of the following product series: EBI 12, EBI 11, EBI 10, EBI 100.Consisting of an accredited calibration according to DIN EN ISO / IEC 17025.Product number: 1030-3223 -
Accredited calibration according to DAkkS guidelines for pressure- temperature data logger, humidity- and conductivity data logger at four temperature points of the following product series: EBI 12, EBI 11, EBI 10, EBI 100.Consisting of an accedited calibration according to DIN EN ISO / IEC 17025.Product number: 1030-3224
-
Accredited calibration according to DAkkS guidelines for pressure- temperature data logger, humidity- and conductivity data logger at five temperature points.Calibration service for pressure- temperature data logger of the following product series:
EBI 12, EBI 11, EBI 10, EBI 100Consisting of an accedited calibration according to DIN EN ISO / IEC 17025.Product number: 1030-3225 -
Accredited calibration according to DAkkS guidelines for pressure- temperature data logger, humidity- and conductivity data logger at six temperature points of the following product series: EBI 12, EBI 11, EBI 10, EBI 100.Consisting of an accedited calibration according to DIN EN ISO / IEC 17025.Product number: 1030-3226
• ISO 17665 Sterilization of health care products — Moist heat
• 2014/53/EU Radio Equipment Directive - RED
• (EC) 1935/2004 Materials and articles which come into contact with foodstuffs
• 2014/53/EU Radio Equipment Directive - RED
• (EC) 1935/2004 Materials and articles which come into contact with foodstuffs
NEW: Information package "Professional data loggers"
Please fill out the form below and the download will start instantly.