Validation logger to measure in steam sterilizer EBI 12-T220

Bendable probe for placement in steam sterilizer drain

This data logger is often used to measure the temperature in the steam sterilizer outlet during thermal testing during validation. It is characterized by its small size and fast response time. The bendable temperature sensor can be placed very well.

Benefits:
• large measuring range
• wireless measurement
• Realtime data transmission
• fast response time
• bendable metal probe

Applications:
• Validation logger for temperature measurement in the steam sterilizer, WD and endoscope washer • Measurement of the temperature in the drain of the steam sterilizer.
• A0 Value calculation
• F0 Value calculation 

Datasheet

Product number: 1340-6604
Data memory
100,320 measurement values
Sensor
Pt 1.000, Class A
Weight
approx. 110 g
Accuracy
± 1,5 °C (-200 °C … -85 °C) ± 0,5°C (-85 °C … -40 °C) ± 0,2°C (-40 °C … 0 °C) ± 0,1 °C (0 °C ... +120 °C) ± 0,05 °C (+120 °C … +140 °C) ± 0,1 °C (+140 °C … +150 °C)
Protection class
IP68
Dimensions
(Ø x H) 48 mm x 24 mm - Needle length 250 mm
Resolution
0,01 °C
Certificate
Factory Calibration: -20 °C, 0 °C, +60 °C and +134 °C
Measured variables
Temperature
Intervall
250 msec ... 24 h
Measuring range
-200 °C … +200 °C
Storage temperature
-20 °C ... +70 °C
  • • Developed for real time monitoring
    • AL 112 is a cable with 3 m length
    • Antenna placement in the field of the door seal of a sterilizer or washer disinfector
    • Antenna steam-tight
    • It is possible by a sealing to introduce it in the chamber
    Product number:: 1340-6007
  • opening tool for EBI 12

    Product number:: 1100-0131
  • AL 285 Logger Check In combination with the software Winlog.validation version >= 3.62 the AL 285 offers you a simple, on site functional check of the measuring channels.
    Product number:: 1248-0285
  • For securing the EBI 12 data loggers in process you need the AL 121 opening tool.
    Product number:: 1248-0122
    • 4-port Interface IF 200
    • Software Winlog.validation
    • USB connection
    • Colored LEDs signaling programming, readout and incorrect development
    • Includes antenna

    Product number:: 1340-6068
    • 4-port Interface IF 200
    • Software Winlog.pro
    • USB connection
    • Colored LEDs signaling programming,readout and incorrect development
    • Includes antenna

    Product number:: 1340-6062
  • • USB-connector
    • Colored LED signals programming,
      readout and faulty execution
    • Including Antenna AL 111
    • Software Winlog.med

    Product number:: 1340-6095
  • Consisting of 3 batteries, 6 O-rings with grease and opening tool EBI 12
    Product number:: 1100-0130
  • For EBI 12 + EBI 16 Consisting of 3 batteries, 6 O-rings with grease.
    Product number:: 1100-0118
  • opening tool for EBI 12

    Product number:: 1100-0131
  • For transport of systainers Fixed seat of the systainers on the trolley
    Product number:: 1248-0127
  • Consisting of 3 batteries, 6 O-rings with grease and opening tool EBI 12
    Product number:: 1100-0130
  • Inlay for EBI 12 and interface especially for validation sets
    Product number:: 1248-1100
  • ISO Calibration for temperature- validation- and process logger at 4 standard points of the following product series: EBI 12, EBI 11, EBI 10, EBI 100.

    Product number:: 1030-2204
  • Accredited calibration according to DAkkS guidelines for temperature- validation- and process logger at three points. Calibration service for data logger of the following product series:
    EBI 12, EBI 11, EBI 10, EBI 100.
    Consisting of an accredited calibration according to DIN EN ISO / IEC 17025.
    Product number:: 1030-3203
  • Accredited calibration according to DAkkS guidelines for temperature- validation- and process logger at four points of the following product series: EBI 12, EBI 11, EBI 10, EBI 100.
    Consisting of an accredited calibration according to DIN EN ISO / IEC 17025.
    Product number:: 1030-3204
  • Accredited calibration according to DAkkS guidelines for temperature- validation- and process logger at five points of the following product series: EBI 12, EBI 11, EBI 10, EBI 100.
    Consisting of an accredited calibration according to DIN EN ISO / IEC 17025.
    Product number:: 1030-3205
  • Accredited calibration according to DAkkS guidelines for temperature- validation- and process logger at six points of the following product series: EBI 12, EBI 11, EBI 10, EBI 100.
    Consisting of an accredited calibration according to DIN EN ISO / IEC 17025.
    Product number:: 1030-3206
ISO 17665 Sterilization of health care products — Moist heat
ISO 15883 Washer Disinfectors
2014/53/EU Radio Equipment Directive - RED
(EC) 1935/2004 Materials and articles which come into contact with foodstuffs